mosquito FAQ

What are the package contents?
1 x Mosquito Swatter
1 x Charging Base
What are the dimensions on the device?
What are the materials made from and what is the device weight?
ABS + electronic components. 360g /12.6 ounces (without base)
What is the battery capacity and charging time?
1200mAh – 3-4 hours charging time.


Something you must know:

 When the electric mosquito swatter is working, there is high voltage on the metal mesh net! Please keep it away from children for avoiding electric shock, and do not use hands to touch the metal mesh net or touch a metal mesh net with a metal object in hand!


Do not use this product in places where flammable gas may exist, and do not use metal or other conductive objects to make spark by making contact between the metal and the metal net.

After use, please push the power switch to the OFF position.

In order to ensure the service life of the battery, if there is no obvious effect when using the swatter to zap mosquitoes, or when the bottom battery indicator light flashes, it means that the battery power has basically run out, please stop using it and charge the product in time, otherwise when the lithium battery voltage is lower than 2.8V, the product low voltage protection function will make the product enter a protected state and trigger that the product cannot work. At this time, the product must be charged before it can be used.

If you don't use it for a long time, recharge it every three months, each charging time is about 3 hours, and the product should be stored in a ventilated, dry place where the relative temperature is less than 80%, and there should be no corrosive chemicals around.

Do not wipe with wet towels or rinse the net surface with water, but you can use a long-hair soft brush or knock it slightly to clean the net surface.

(Mosquito debris may cause a short circuit on the metal mesh surface and damage the electric mosquito swatter, please clean it in time).

 Please don't use the product to tap other hard objects or pinch the mesh surface of the product to avoid damaging the metal mesh surface.

 Please use the product in strict accordance with the requirements and notes of the instructions, and do not disassemble the product at will, such as illegal operations, and we will not be responsible for any manual damage caused by illegal operations.